anthurium warocqueanum

How to Grow and Care for Queen Anthurium Warocqueanum Plants

Sharing is caring!

When it comes to exotic plants, the anthurium is definitely one of the most impressive options. These beautiful plants are diverse and varied, and they can be surprisingly easy to care for if you know what you’re doing. 

In this post, we’ll walk you through everything you need to know about growing and caring for Anthurium warocqueanum. Keep reading for more information!

Plant Facts

Scientific nameAnthurium warocqueanum
Common namesQueen Anthurium
FamilyAraceae
Plant TypeHouseplant
Height and Width6’ tall, 4” wide
OriginEcuador, Columbia
Flower colorsNone
Foliage colorDark to light green 
Sun ExposureIndirect sunlight
Soil Type & pHWell-drained potting soil (like peat moss or charcoal mix), acidic to neutral 
Special featuresLow maintenance, good for containers, requires regular fertilization

How to Grow Anthurium Warocqueanum

The A. warocqueanum is a beautiful plant that originates from Colombia. It is a popular choice for decoration due to its large, heart-shaped leaves. The plant can be grown either in a pot or in a bed, and it prefers humid conditions typical of tropical rainforests.

It is best to plant the houseplant in the spring or summer, in an area that receives partial sunlight. When watering the plant, be sure to avoid getting water on the leaves, as this can cause them to brown. 

With proper care, your queen anthurium plants will thrive and provide a stunning addition to any home. Here’s what you need to know!

Propagation

A. warocqueanum is easy to propagate from stem cuttings. Simply take a cutting from a healthy plant and remove the lower leaves. Dip the cutting in rooting hormone and place it in a well-draining potting mix. 

Water regularly and keep the soil moist but not soggy. Keep the cutting in a warm, humid location out of direct sunlight until new growth appears. Once the new growth is established, you can gradually move the plant to a more sunny location. 

With a little patience and care, you can soon enjoy the beauty of Queen Anthurium in your own home.

Soil

These anthuriums prefer moist, well-drained soils and thrive in humid environments. The ideal soil type for these tropical plants is a rich, loamy mix that is high in organic matter (sphagnum moss or orchid bark). The soil should be kept evenly moist, but not soggy, and the plant should be protected from direct sun and strong drafts. 

The ideal soil type for queen anthuriums is a loose, sandy loam that allows water to quickly drain away. Clay or heavy soils can hold too much water and lead to root rot, so it is important to choose a light soil mix. One way to ensure good drainage is to add pumice or perlite to the soil. Both of these materials help to aerate the soil and improve drainage. In addition, it is important to use a pot with holes in the bottom to allow excess water to drain away.

Pruning

Queen anthuriums are beautiful, flowering plants that are native to the tropics. These plants thrive in warm, humid environments and don’t require too much care. However, queen anthuriums can become leggy and overgrown if they are not pruned regularly. 

Pruning helps to promote new growth and keeps the plant looking its best. To prune a queen anthurium, start by removing any dead or dying leaves. Next, cut back any long stems to encourage new growth. 

Finally, trim away any damaged or diseased leaves. That’s all there is to it!

Repotting and Transplanting

While the anthurium is relatively easy to care for, it does require occasional repotting or transplanting in order to stay healthy. 

The best time to repot or transplant these plant species is in the spring, when the plant is beginning to actively grow. When repotting, be sure to use a pot that is only slightly larger than the current one, as anthuriums do not like being rootbound. 

Transplanting should only be done if necessary, as it can be stressful for the plant. However, if you do need to transplant your anthurium, be sure to choose a spot that has well-drained soil and filtered sunlight. 

How to Care for Anthurium Warocqueanum 

Also known as the Queen Anthurium, this tropical plant is relatively easy to care for, making it a popular choice for both beginners and experienced gardeners alike. 

With a little care and attention, your Queen Anthurium will thrive and provide you with beautiful blooms for many years to come. 

Here are some anthurium care instructions for keeping your plant healthy and happy.

Water

Although queen anthuriums are relatively drought-tolerant, they will produce more flowers if given a consistent moisture supply. The best way to water a queen anthurium is to allow the soil to dry out slightly between watering.

Water the plant until the soil is moist but not soggy, and empty any excess water from the saucer to prevent root rot. Queen anthuriums do not like to be wet all the time, so it is important to not overdo it with water. 

Sunlight

When choosing a location for growing anthurium warocqueanum, it is important to provide it with bright, indirect sunlight. The ideal spot would be near a south- or east-facing window. If you cannot provide enough natural bright light, you may need to supplement with artificial lighting. 

Temperature and Humidity

In its natural habitat, the A. warocqueanum prefers warm, humid conditions with plenty of filtered sunlight. However, it can also adapt to a wide range of growing conditions, making it a popular houseplant in many parts of the world. For optimal growth, however, it is important to provide the Anthurium warocqueanum with warm temperatures and high humidity. 

In our homes, however, the air is often quite dry, especially in winter when we have the heat on. This can cause problems for our plants, leading to dried out soil and wilting leaves.

While there are a number of ways to increase the humidity around your anthurium species (such as using a humidifier or pebble tray), one of the easiest is to simply group them together. This creates a microclimate where the evaporating water from the plants will raise the humidity level. Just be sure to keep an eye on your anthurium plants and make sure they’re not getting too much moisture, as this can lead to fungal growth. 

The ideal temperature range for this plant is between 65 and 85 degrees Fahrenheit, and the ideal relative humidity is between 60 and 80%. By creating a warm, humid environment for your A. warocqueanum, you will help to ensure that it thrives and produces beautiful blooms throughout the year.

Fertilizer

Anthurium warocqueanum is relatively easy to care for, but it does require some specific fertilizer requirements in order to bloom optimally. For best results, use a fertilizer that is high in phosphorus and low in nitrogen.

Apply the fertilizer to the soil around the base of the plant, taking care not to get any on the dark green leaves or flowers. Water the plant thoroughly after applying the fertilizer, and then allow the top inch or so of soil to dry out before watering again during the growing season.

Pest and diseases

Queen anthuriums are beautiful, exotic flowers that make a stunning addition to any home. However, like other plants, they can be susceptible to pests and diseases. Here are some of the most common.

Powdery Mildew

Powdery mildew is a common fungal disease that can affect many different types of plants, including Queen anthurium. 

The fungus attacks the leaves, causing them to become covered in a white or gray powdery substance. The leaves may also become yellowed or stunted. If left untreated, this disease can eventually kill the plant. Luckily, there are a few simple steps that can be taken to deal with this problem. 

First, it is important to remove any affected leaves from the plant. This will help to prevent the fungus from spreading. Next, the plant should be watered at the base rather than from above, as this will help to prevent the leaves from becoming wet and inviting further growth of the fungus. Finally, a fungicide may be used to help kill the fungus and prevent it from spreading.

Mealybugs

Mealybugs are tiny, wingless insects that are covered in a white, fuzzy substance. They feast on the sap of plants, causing leaves to wilt and turn yellow. Mealybugs can quickly become a problem in gardens, especially if they infest queen anthuriums. 

To get rid of mealybugs, start by spraying the plant with water. This will dislodge some of the insects and make them easier to spot. Then, use a cotton swab dipped in rubbing alcohol to remove any remaining bugs. Be sure to check the underside of leaves, as this is where mealybugs like to hide. 

You may need to repeat this process several times before the plants are completely mealybug-free.

Root/stem rot

Root and stem rot is a common problem with queen anthuriums, caused by a variety of fungi. The first step in dealing with this problem is to identify the symptoms. 

The plant may have yellow or brown leaves, wilting stems, and slow growth. If you suspect that your anthurium warocqueanum plant has root or stem rot, it’s important to act quickly. 

Remove the affected leaves and stems, and replant the queen anthurium in fresh potting mix. Be sure to sterilize your tools before and after use, to prevent the spread of disease.

Anthracnose

Anthracnose is a fungal disease that affects many different types of plants, including Anthurium warocqueanum. 

The disease causes leaf spots and can eventually kill the plant if left untreated. There are several ways to deal with anthracnose, but the most important thing is to act quickly. 

The first step is to remove any affected leaves from the plant. This will help to stop the spread of the disease. Next, water the plant at the base rather than from above to prevent water droplets from spreading the fungus. Finally, apply a fungicide to the plant according to the package directions. 

Leaf spot 

Leaf spot is a common problem with Anthurium warocqueanum. The spots are usually brown or black, and they can vary in size from small dots to large patches. 

Leaf spot is caused by a variety of fungal diseases, and it can be difficult to control. The best way to deal with leaf spot is to prevent it from occurring in the first place. This can be done by providing the plant with good air circulation and keeping the leaves dry. 

If leaf spot does occur, it is important to remove affected leaves and dispose of them immediately. Treating the plant with a fungicide may also be necessary.

Common Varieties and Cultivars

While there are over 600 species of anthurium, only a handful are commonly cultivated as houseplants. Queen anthurium is one of them!

Of these other types of anthurium, the following three varieties are among the best to plant indoors.

  • Annual Anthuriums: Also known as painter’s palette or flamingo flower, annual anthuriums are native to South America. They are characterized by their glossy, heart-shaped leaves and bright red, pink, or white flowers. Annual anthuriums prefer warm temperatures and high humidity levels, making them ideal for growing houses or greenhouses.
  • Pseudo Anthuriums: These anthuriums are native to Mexico and Central America and are closely related to annual anthuriums. They share many of the same features, including glossy leaves and colorful flowers. However, pseudo anthuriums are more tolerant of cooler temperatures and can even tolerate light frosts. As such, they make a good choice for gardeners in cooler climates.
  • Aristolochiaceae: This family of anthuriums is native to the Caribbean and is characterized by its distinctively shaped flowers. The most common variety is the bird’s nest anthurium, which gets its name from its nest-like

FAQs

How often do you water Anthurium warocqueanum?

Water Anthurium warocqueanum when the top inch of soil feels dry, typically every 1-2 weeks. Adjust watering frequency based on factors such as temperature, humidity, and pot size to avoid overwatering, which can lead to root rot.

Is Anthurium warocqueanum hard to care for?

Anthurium warocqueanum can be challenging to care for due to its specific humidity and temperature requirements. It thrives in warm, humid environments with bright, indirect light and well-draining soil. Providing proper anthurium warocqueanum care, including regular watering, high humidity, and adequate light, is essential for its health and growth.

Why is Anthurium warocqueanum so expensive?

Anthurium warocqueanum is relatively rare and slow-growing, which contributes to its high price. Additionally, its striking foliage and unique appearance make it highly sought after by collectors and enthusiasts, further driving up its value in the market.

What is the problem with Anthurium warocqueanum leaves?

Common problems with Anthurium warocqueanum leaves include browning or yellowing, which can be caused by various factors such as underwatering, overwatering, low humidity, or improper light levels. Additionally, pests like spider mites or fungal diseases can also affect the leaves. Proper care, including maintaining consistent watering, humidity, and inspectin

Conclusion

Anthurium warocqueanum is a beautiful and exotic plant that can be grown in your home with a little bit of care. 

Consider adding one to your indoor garden and enjoy the gorgeous foliage all year long.

*image by khairil77/depositphotos

Scroll to Top